Finished products



Aiming Post Lamp (APL)


Military forces around the world have been using the Aiming Post Lamps (APL) for many years, usually for the alignment of howitzers, mortars and heavy machine guns. mb-microtec ag now offers an APL featuring the proven trigalight-technology. Visible over a minimum of 100 meters. The mb-microtec ag APL requires no external source of energy and remains fully operational for more than 20 years without any maintenance whatsoever.

The APL is easily secured and aligned using integrated clamps.

Specifications

A lens spreads the light emitted over a spherical angle of 7.5° (133 millirads).
- Body and clamp contained in a one piece polyamid moulding.
- Weight reduced by 60 %.
- Fully corrosion resistant.
- Increased operational temperature range.
- Sighting points mounted along the top edge of the unit to enable fast alignment of the lamp to
   the dial sight during daylight installation.
- Optionally, the sighting points can be illuminated for night installation.
- Greater packing density.
- Improved resistance to shock and vibration.
- Accommodates square and round poles diameter 28 to 36 mm. (Other clamp sizes available.)




1. Materials Body / Hand wheel: Polyamid 6 (DIN 7228), black,
    Lens: Acrylic, Clamp: Aluminium alloy, anodized, black
2. Weight overall: 180 gramms
3. Body diameter: 47,5 mm
4. Length overall: 115 mm
5. Available colours: green, yellow, orange and blue

Details on APL as PDF

Variable brightness Torch

When used as a pocket lamp, the torch enables reliable reading of documents, maps and instruments even in total darkness.
The brightness can be adjusted with the help of a slide.
The torch can also be used as a marking point for the limitation of firing angles or for aligning heavy weapons.

Specifications

A visual range of 50 metres.
The variable brightness torch is manufactured from black polyamid and comes
with a black nylon cord, 2 meters in length.



1. Materials body / Thumb wheel: Polyamid 6 (DIN 7728), black, Lens: Acrylic, Screw:
    black anodized aluminium alloy
2. Illumination colour: green – standard, yellow – optional
3. Available Models:
    a) Small Torch, Stock no. ST 001,
         Size: 25 x 25 x 50 mm (Diameter / Length),
         Weight overall: 29 gramms
    b) Big Torch, Stock no. BT 001,
         Size: 35 x 35 x 60 mm (Diameter / Length),
         Weight overall: 65 gramms


Details on Torch as PDF

Illuminated Map Reader
NSN 6605-25-148-8164 Map Reader with stand. scale


The mb-microtec ag map reader is equipped with trigalight-technology and thus enables the soldiers to read documents and maps in darkness. When equipped with appropriate scaling it can also be used to guide or correct artillery or mortar fire. Installed in a sturdy polyamide body that protects the built-in magnifying lens as well as the the trigalight. This tactical device is absolutely shock-resistant and up to the task without ever needing service or maintenance. This Map Reader not only requires no source of energy, it can also survive extreme temperatures without any problems.

Specifications

The image is magnified by a high quality lens (x 1,7) making small landmarks and contour lines on maps easily and quickly readable. The body of the map reader is manufactured using black polyamid.

Three standard versions of the mapreader are available:
- Open version without bottom cover Stock no. MR 0.
- Sealed version with bottom cover calibration: 1:25.000 and 1:50.000 lateral, 0-6400 mils radial.
   Stock no. MR 25.50/6400.
- Sealed version with bottom cover calibration: 1 inch/mile lateral, 0-6400 miles radial.
   Stock no. MR 1/6400.

All sealed versions are manufactured to withstand ingress of moisture and to prevent mouldgrowth. Nonstandard scales will be made to special order. A light, tight webbing case is available allowing attachment to the waist belt (optional).



1. Materials body:
    Polyamid 6 (DIN 7728), black, Lens: Acrylic, Bottom cover: Acrylic
2. Weight overall: 104 gramms
3. Size: 66 x 66 x 35 mm (Diameter / High)
4. Black nylon cord (2 m)
5. Illumination colour: yellow – standard, green – optional, white – optional


Details on Map Reader as PDF

Illuminated Arrow Marker


Illuminated Arrow Markers can be used as route markers both during daylight and at night. Like all other mb-microtec ag products, thanks to the trigalight-technology they likewise, require no batteries or other sources of energy. The Arrow Markers are absolutely maintenance-free and are often used as escape route markers and orientation aid in the event of power failures.

The night-time visibility of the lights is a minimum of 50 meters.

Specifications

Their colour can be specified to provide additional coded information. The arrow markers are very rugged and withstand field use in all weather. They consist of a body of high quality dyed polymer with high surface durability.



1. Length overall
168 mm
2. Height overall
102 mm
3. Thickness plate
15 mm
4. incl. Clamp
23 mm
5. Dimension trigalight:
dia 5 x 40 mm
6. Weight total
205 g
 


trigalight® Colour

Green standard
Orange optional
Blue optional


Sign colour in daylight

Green
Blue
Red
Black


Details on Arrow Marker as PDF


Illuminated Directional Signs


Self-illuminating signs featuring trigalight-technology are definitely first choice for the marking of escape routes in buildings. The colour of the sign material, the light sources and the graphics can be varied in accordance with the respective customer requirements. The sign with the built in trigalight light source is attached to the desired place and then you can forget about it. No switches and no need to give any thoughts to power failures or to the tedious replacement of burnt-out light bulbs. Signs featuring trigalight- technology function reliably in all situations. They need no external sources of energy and are again, completely maintenance free for a long time.

The low, additional costs for mb-microtec ag trigalight signs are more than made up over the total lifespan of the sign through the absolute freedom from maintenance and no ongoing operating costs are incurred (no electricity consumption).

Specifications

In standardized sizes (125 mm x 50 mm), they are used extensively in civilian aircraft but are also well suited for general use. mb-microtec ag has developed an efficient and rugged product which is also supplied in other languages (see picture). It is visible at a distance up to 30 m. A larger EXIT sign (340 mm x 230 mm) ist also available. It is commonly used in the US and the UK, mainly in hotels, public buildings, factories and movie theaters.
1. Standard weight for aircraft
125 x 50 mm
2. Visible to
30 m
3. Special weight
on request


More information available upon request.


Details on the Directional Signs as PDF



   Special fire fighting forces at work at a destroyed oil rig in Kuwait.

   Even under the most extreme circumstances! trigalights! The preferred escape and rescue route marker in    the oil industry.

   “place and forget“